| 姓 名 | 赵明 | 性 别 | 男 | 出生年月 | 1961-04 |
|---|---|---|---|---|---|
| 所在院校 | 吉林大学 | 所在院系 | 材料科学与工程学院 | ||
| 职称 | 教授 | 招生专业 | 材料学 | ||
| 研究领域 | 金属材料工程 |
| 联系方式 | zhaoming@jlu.edu.cn | 电 话 | 0431******* | 邮 编 | 0 | |
|---|---|---|---|---|---|---|
| 地 址 |
| 个人简介 |
| 主要学历： 1978.09-1982.06 在吉林工业大学材料科学与工程系获工学学士学位 1992.09-1996.06 在吉林工业大学材料科学与工程系获工学硕士学位 2000.03-2004.06 在吉林大学材料科学与工程学院获工学博士学位 主要教学学术经历： 1989.12- 被聘为吉林工业大学材料科学与工程系讲师 1995.09- 被聘为吉林工业大学材料科学与工程系副教授 2001.09- 被聘为吉林大学材料科学与工程学院教授 主要学历： 1978.09-1982.06 在吉林工业大学材料科学与工程系获工学学士学位 1992.09-1996.06 在吉林工业大学材料科学与工程系获工学硕士学位 2000.03-2004.06 在吉林大学材料科学与工程学院获工学博士学位 主要教学学术经历： 1989.12- 被聘为吉林工业大学材料科学与工程系讲师 1995.09- 被聘为吉林工业大学材料科学与工程系副教授 2001.09- 被聘为吉林大学材料科学与工程学院教授 |
| 获得奖项 |
| 1. “提高石油化工设备耐应力腐蚀性能研究”，吉林省科技进步二等奖，1998.11. 2. “形状记忆合金量热学和相变热力学的理论与应用”，国家机械工业局科技进步 三等奖，1998.12. 3. “非晶和纳米晶体的量热学和相变热力学”，教育部科技进步三等奖，1999.01. 4、铁基形状记忆合金铸造管接头制造方法，国家发明专利， 专利号：ZL 02 1 32907.9，2004.05.26 1. “提高石油化工设备耐应力腐蚀性能研究”，吉林省科技进步二等奖，1998.11. 2. “形状记忆合金量热学和相变热力学的理论与应用”，国家机械工业局科技进步 三等奖，1998.12. 3. “非晶和纳米晶体的量热学和相变热力学”，教育部科技进步三等奖，1999.01. 4、铁基形状记忆合金铸造管接头制造方法，国家发明专利， 专利号：ZL 02 1 32907.9，2004.05.26 |
| 著作及论文 |
| 最近4年发表的论文及著作： 1.X. F. Cui, M. Zhao, Q. Jiang “Curie temperature of ferromagnetic low-dimensional metals”, Thin Solid Films 472 (2005) 328-333.. 2.M. Zhao, Q. Jiang, “Melting and surface melting of low-dimensional In crystals”, Solid State Commun. 130(2004) 37-39. 3.Q. Jiang, H. M. Lu, M. Zhao, “Modelling of surface energy of elemental crystals”, J. Phys. Condens. Matter 16(2004) 521-530. 4.M. Zhao, Q. Jiang, “Crystal-liquid interface energy and surface stress of alkali halides”, Mater. Chem. Phys. 87(2004) 1-4. 5.Q. Jiang, D. S. Zhao, M. Zhao, “Modelling the surface stress of alkali halides”, Phil. Mag. Lett. 84 (2004) 63-68. 6.Q. Jiang, X. F. Cui, M. Zhao, “Size effects on Curie temperature of ferroelectric particles”, Appl. Phys. A 78(2004) 703-704. 7.J. C. Li, M. Zhao, Q. Jiang, “Wear behavior of Al90Mn8Ce2 alloy prepared by powder metallurgy”, Mater. Design 25(2004) 495-498. 8.J. C. Li, M. Zhao and Q. Jiang “Microstructure and corrosion resistance of welding seam of SAF 2205 duplex stainless steel by different welding materials”, Corros. Rev. 22(2004) 115-126. 9.J. C. Li, M. Zhao and Q. Jiang, “Corrosion of a cooling pipe elbow in an oxidative chlorination reactor at a chlorine and alkali factory”, Mater. Performance 43(2004) No. 4, 54-55. 10.M. Zhao, J. C. Li, Q. Jiang “Failure analysis of an oxidative chlorination reactor clad with AISI 304L stainless steel”, Prot. Met.+ 39(2003) 595-596. 11.M. Zhao, J. C. Li, Q. Jiang, “Hall-Petch relationship in nanometer size range”, J. Alloy Compd. 361(2003) 160-164. 12.Q. Jiang, J. C. Li, M. Zhao, “Thermodynami... 最近4年发表的论文及著作： 1.X. F. Cui, M. Zhao, Q. Jiang “Curie temperature of ferromagnetic low-dimensional metals”, Thin Solid Films 472 (2005) 328-333.. 2.M. Zhao, Q. Jiang, “Melting and surface melting of low-dimensional In crystals”, Solid State Commun. 130(2004) 37-39. 3.Q. Jiang, H. M. Lu, M. Zhao, “Modelling of surface energy of elemental crystals”, J. Phys. Condens. Matter 16(2004) 521-530. 4.M. Zhao, Q. Jiang, “Crystal-liquid interface energy and surface stress of alkali halides”, Mater. Chem. Phys. 87(2004) 1-4. 5.Q. Jiang, D. S. Zhao, M. Zhao, “Modelling the surface stress of alkali halides”, Phil. Mag. Lett. 84 (2004) 63-68. 6.Q. Jiang, X. F. Cui, M. Zhao, “Size effects on Curie temperature of ferroelectric particles”, Appl. Phys. A 78(2004) 703-704. 7.J. C. Li, M. Zhao, Q. Jiang, “Wear behavior of Al90Mn8Ce2 alloy prepared by powder metallurgy”, Mater. Design 25(2004) 495-498. 8.J. C. Li, M. Zhao and Q. Jiang “Microstructure and corrosion resistance of welding seam of SAF 2205 duplex stainless steel by different welding materials”, Corros. Rev. 22(2004) 115-126. 9.J. C. Li, M. Zhao and Q. Jiang, “Corrosion of a cooling pipe elbow in an oxidative chlorination reactor at a chlorine and alkali factory”, Mater. Performance 43(2004) No. 4, 54-55. 10.M. Zhao, J. C. Li, Q. Jiang “Failure analysis of an oxidative chlorination reactor clad with AISI 304L stainless steel”, Prot. Met.+ 39(2003) 595-596. 11.M. Zhao, J. C. Li, Q. Jiang, “Hall-Petch relationship in nanometer size range”, J. Alloy Compd. 361(2003) 160-164. 12.Q. Jiang, J. C. Li, M. Zhao, “Thermodynamic consideration on solid transition of CdSe nanocrystals induced by pressure”, J. Phys. Chem. B 107(2003) 13769-13771. 13.Q. Jiang, H. M. Lu, M. Zhao, “Binary phase equilibrium shift induced by interface stress”, Scripta Mater. 49(2003) 547-550. 14.Q. Jiang, M. Zhao, J. C. Li, “Formation of monoatomic chains of metallic elements”, Appl. Surf. Sci. 206 (2003) 331-335. 15.M. Zhao, J. C. Li, Q. Jiang, “Cast pipe joints of Fe-15Mn-5Si-8Cr-5Ni-0.25C shape memory alloy with high carbon content”, Materialwiss. Werkst. 34(2003) 756-759. 16.Q. Jiang, S. Zhang, M. Zhao, “Size-dependent melting point of noble metals”, Mater. Chem. Phys. 82(2003) 225-227. 17.Z. Wen, M. Zhao, Q. Jiang, “Surface melting of polycrystals Pb and In within 1 K below melting temperature”, Mater. Lett. 57(2003) 2515-2518. 18.Q. Jiang, D. S. Zhao, M. Zhao, “Modeling of surface stress of semiconductors”, Surf. Rev. Lett. 10(2003) 49-53. 19.J. C. Li, M. Zhao, Q. Jiang, “Failure analysis of Ni200 heat exchanger piping in a chlorine and alkali factory”, Mater. Performance 42(2003) No. 8, 52-55. 20.J. C. Li, M. Zhao, Q. Jiang, J. Eckert, “Surface coating on steel by pressure friction”, Mater. Sci. Tech. 18(2002) 1382-1384. 21.J. C. Li, M. Zhao, Q. Jiang, “Bulk high hardness Al90Ce2Mn8 alloy prepared by powder metallurgy”, Powder Metall. 45(2002) 80-82. 22.Z. Wen, M. Zhao, Q. Jiang, “Size range of solid-liquid interface energy of organic crystals”, J. Phys. Chem. B. 106(2002) 4266-4268. 23.Q. Jiang, X. H. Zhou, M. Zhao, “Nucleation temperature of elements”, J. Chem. Phys. 117(2002) 10269-10273. 24.D. S. Zhao, M. Zhao, Q. Jiang, “Size and temperature dependence of nanodiamond-nanographite transition related with surface stress”, Diam. Relat. Mater. 11(2002) 234-236. 25.X. H. Zhou, M. Zhao, Q. Jiang, “Single crystallization of Al interconnection wires”, Semicond. Sci. Tech. 17(2002) 1108-1110. 26.Q. Jiang, D. S. Zhao, M. Zhao, “Intrinsic surface and interface stress of low-dimensional crystals”, Int. J. Mod. Phys. B 16(2002) 64-70. 27.L. H. Liang, M. Zhao, Q. Jiang, “Melting enthalpy depression of nanocrystals based on surface effect”, J. Mater. Sci. Lett. 21(2002) 1843-1845. 28.J. C. Li, M. Zhao, Q. Jiang, “Temperature-dependent corrosion resistance of several alloys in alkali industrial environment”, Mater. Corros. 53(2002) 269-273. 29.J. C. Li, M. Zhao, Q. Jiang, “Comparison of shape memory effect between casting and forged alloys of Fe14Mn6Si9Cr5Ni” J. Mater. Eng. Perform. 11(2002) 313-316. 30.J. C. Li, M. Zhao and Q. Jiang, “Failure analysis of pipes in radiate section of ethylene cracking decomposition furnace induced by sulfurization”, Corros. Rev. 20(2002) 531-536. 31.J. C. Li, M. Zhao, Q. Jiang, "Intergranular corrosion of tubes in a dichloroethane cracking decomposition furnace", Mater. Performance 41(2002) No. 5, 50-53. 32.M. Zhao, X. H. Zhou, Q. Jiang, “Comparison of different models for melting point change of metallic nanocrystals”, J. Mater. Res. 16(2001) 3304-3308. 33.Q. Jiang, D. S. Zhao, M. Zhao, “Size-dependent interface energy and related interface stress”, Acta Mater. 49(2001) 3143-3147. 34.Q. Jiang, L. H. Liang, M. Zhao, “Modelling of the melting temperature of nano-ice in MCM-41 pores”, J. Phys. Condens. Mat. 13(2001) L397-L401. 35.Z. Zhang, M. Zhao, Q. Jiang, “Melting temperatures of semiconductor nanocrystals in the mesoscopic size range”, Semicond. Sci. Tech. 16(2001) L33-L35. 36.Z. Zhang, M. Zhao, Q. Jiang, “Glass transition thermodynamics of organic particles”, Physica B 293(2001) 232-236. 37.Z. Wen, M. Zhao, Q. Jiang, “The melting temperature of molecular nanocrystals at the lower bound of the mesoscopic size range”, J. Phys. Condens. Matter 12(2000) 8819-8824. 38.J. C. Li, M. Zhao, Q. Jiang, “Alloy design of FeMnSiCrNi shape-memory alloys related to stacking-fault energy”, Metall. Mater. Trans. 31A(2000) 581-584. |
| 承担项目 |
| 2000年以来主要承担的科研项目及课题： 序号 项目或课题名称 项目来源 起止时间 1、金属的熔化、过热及新型亚稳合金，国家自然科学基金委重点项目 2000-2002 参加人 2、铸造铁基形状记忆合金管接头，吉林省科技厅，2001.01-2002.12 参加人 3、金属形成非晶、纳米晶和单晶的热力学条件，国家自然科学基金委， 2001.01-2003.12 参加人 4、金属的熔化与结晶热力学... 2000年以来主要承担的科研项目及课题： 序号 项目或课题名称 项目来源 起止时间 1、金属的熔化、过热及新型亚稳合金，国家自然科学基金委重点项目 2000-2002 参加人 2、铸造铁基形状记忆合金管接头，吉林省科技厅，2001.01-2002.12 参加人 3、金属形成非晶、纳米晶和单晶的热力学条件，国家自然科学基金委， 2001.01-2003.12 参加人 4、金属的熔化与结晶热力学，国家自然科学基金委国家杰出青年科学基金 子项目负责人，2001.01-2004.12 5、材料若干介观性能的表征及其尺度效应，国家科技部973项目 子项目负责人，2004.10-2009.09 |